Our walk-in coolers are offered in standard and custom sizes. Coolers are also available with and without floors. On floorless installation the masonry floor at the job site is sufficient. Our coolers meet and exceed all government requirements and standards. 

EISA of 2007 & US D.O.E Certified Compliant 4” Thermal Resistant Panel* ASTM Test C-518 Flame spread and smoke development 5/190 ASTM Test E84 4” Thermal Resistant Panel* ASTM Test C-518 Flame spread and smoke development 15/250 ASTM Test E84 

Walls and ceilings: Standard Embossed White Galvalume or 26 Gauge Stainless Steel 2B Finish with PVC. 

Heavy gauge smooth aluminum. Optional Stainless Steel & Marine Plywood Reinforcement. 

Panels have factory installed, NSF approved gasket, which ensures a proper seal and better appearance. Standard gaskets are 1/8” closed cell neoprene. Panel facing shall be laminated to rigid insulation with urethane based adhesive under pressure to ensure a strong and permanent bond. Panels are of 100% insulation (non-wood construction) and all panel edges are tongue and groove. Panel connectors are factory installed rotary cam type speed locks. Floor panels are designed to sustain a load of 500 lbs. per square foot. Where floor panels are not required, 1” x 1” aluminum angle or NSF plastic screed will be furnished to ensure a proper seal. Optional reinforcements can be added for heavier loads. To help reduce installation time, all panels are marked to correspond with the installation drawing supplied by the factory. 

Also provided, one Allen wrench along with miscellaneous installation materials. Options for other size boxes so you can have multiple items available for selection.